Fork Mount Kit

The fork mount is similar to the tapered mount. But  it includes a 30-degree taper built into it.  It is only available in the 2.25″ bar diameter size, which will fit most fork diameters.  This mount was made especially for forks, which are often at a 30-degree rake.  The fork mount will correct the light angle to be straight-ahead, without the use of shims (in most cases).  Note:  These mounts are glued in-place.  No screws can go into forks or damage to the fork will occur.

Need help ordering? Call us at (480) 209-9764.

Fork Mount Kit includes:

2 LED Light Modules

Installation Hardware

Wiring and Connectors

Bullet Switch

Installation Instructions

NOTE: To complete your order, we need you to give us the diameter of your left-hand grip. Using a tape measure or caliper, measure the area where the stainless steel bullet switch clamp will mount. A nice snug fit is required to prevent the clamp from moving when the switch button is depressed. (Example: 1.25″). Include the measurement in the space provided at checkout. We will include the proper size clamp with your order.